Free shipping over C$100
Edelbrock Victor Jr. 23° Cylinder Head for S/B Chevy Mechanical Roller Camshaft (220cc)
Part # 61259
Description
Edelbrock part #61259 Victor Jr. 23deg 220 cylinder head is designed for small-block Chevy Its 64cc combustion chamber yields around 10:1 compression ratio in a typical flat-top application and about 12.5:1 when used with some of the most common 12cc dome pistons. One of the key features of the Victor Jr. 23deg 220 cylinder head is the CNC machined chambers and bowls, which result in consistency and improved performance. They also feature angled spark plug holes and maintain the stock 23deg valve angle as well as the intake flange bolt pattern for use with 1986 and earlier intake manifolds. All of this allows this cylinder head to deliver 530-580 hp potential right-out-of-the-box, making them ideal for a budget minded engine build desiring a high quality cylinder head that still uses a stud and guide plate rocker system. Cylinder Head Specifications: - Exhaust port location: Raised .300" - Spark plug fitment: 14mm x .750 reach, gasket seat
Specifications
| Assembled | Yes |
|---|---|
| Camshaft Type | Mechanical Roller |
| CNC Ported | Yes |
| Combustion Chamber Volume | 64 cc |
| Construction Type | Complete |
| Cylinder Head Gasket Included | No |
| Deck Thickness | 0.6875 in |
| EGR Port | No |
| Exhaust Port Location | +.300 |
| Exhaust Runner Volume | 85 |
| Exhaust Valve Diameter | 1.60 in |
| Family | Victor Jr. |
| Grade Type | Performance |
| Guide Material | Manganese Bronze |
| Guide Plate Material | Chromoly Steel |
| Guide Plates Included | Yes |
| Head Casting Number | 27-61259 |
| Horsepower | 450-600 |
| Intake Runner Volume | 220 cc |
| Intake Valve Diameter | 2.10 in |
| Material | Aluminum |
| Mounting Hardware Included | No |
| Push Rod Diameter | (Suggested) 0.6875 in |
| Quantity | Sold Individually |
| Retainer Included | Yes |
| Rocker Arm Stud Diameter | 0.4375 in |
| Rocker Arm Studs/Bolts Included | Yes |
| Rocker Arms Included | No |
| Rotor Center Bore Inside Diameter | angled |
| Seat Angle | Exhaust 45 deg/Intake 45 deg |
| UPC / GTIN | 00085347612598 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1977 - 1979 | Buick | Century | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | Buick | Regal | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1979 | Buick | Skylark | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1962 - 1967 | Chevrolet | Bel Air | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | Bel Air | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | Bel Air | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | Chevrolet | Bel Air | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1962 - 1967 | Chevrolet | Biscayne | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | Biscayne | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1972 | Chevrolet | Biscayne | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1969 - 1974 | Chevrolet | Blazer | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1969 - 1972 | Chevrolet | Brookwood | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | Chevrolet | C10 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1980 | Chevrolet | C10 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1982 - 1986 | Chevrolet | C10 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | C10 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | C10 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | C10 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1968 | Chevrolet | C10 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | C10 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1986 | Chevrolet | C10 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 | Chevrolet | C20 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1980 | Chevrolet | C20 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | C20 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | C20 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | C20 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | C20 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1968 | Chevrolet | C20 Suburban | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | C20 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | Chevrolet | C20 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1980 | Chevrolet | C20 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | C20 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 | Chevrolet | C30 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1978 | Chevrolet | C30 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1986 | Chevrolet | C30 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | C30 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | C30 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | C30 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1967 - 1974 | Chevrolet | Camaro | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1981 | Chevrolet | Camaro | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | Caprice | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | Caprice | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | Caprice | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1976 | Chevrolet | Caprice | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1980 | Chevrolet | Caprice | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1985 - 1986 | Chevrolet | Caprice | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1964 - 1968 | Chevrolet | Chevelle | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1971 | Chevrolet | Chevelle | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1965 - 1966 | Chevrolet | Chevy II | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | Chevrolet | Chevy II | 4.6L V8, 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | Chevy II | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1962 - 1967 | Chevrolet | Corvette | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | Corvette | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1972 | Chevrolet | Corvette | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1974 | Chevrolet | Corvette | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | Chevrolet | Corvette | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 | Chevrolet | Corvette | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1980 - 1981 | Chevrolet | Corvette | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | El Camino | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | El Camino | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | El Camino | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1976 | Chevrolet | El Camino | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1979 | Chevrolet | El Camino | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1986 | Chevrolet | G10 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1974 | Chevrolet | G10 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1980 | Chevrolet | G20 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | G20 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1970 - 1974 | Chevrolet | G20 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1980 | Chevrolet | G30 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | G30 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1974 | Chevrolet | G30 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1962 - 1963 | Chevrolet | Impala | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1964 - 1968 | Chevrolet | Impala | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | Impala | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1976 | Chevrolet | Impala | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1985 | Chevrolet | Impala | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1980 | Chevrolet | K10 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1982 - 1986 | Chevrolet | K10 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | K10 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | K10 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | K10 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1968 | Chevrolet | K10 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | K10 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1979 | Chevrolet | K10 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | Chevrolet | K10 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1980 | Chevrolet | K20 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | K20 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 - 1967 | Chevrolet | K20 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | K20 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | K20 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1968 | Chevrolet | K20 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1970 | Chevrolet | K20 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1972 - 1974 | Chevrolet | K20 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1980 | Chevrolet | K20 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | K20 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1980 | Chevrolet | K30 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | Chevrolet | K30 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | Chevrolet | K30 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | Chevrolet | K30 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1979 | Chevrolet | K5 Blazer | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | Chevrolet | K5 Blazer | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1972 | Chevrolet | Kingswood | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | Chevrolet | Malibu | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 - 1981 | Chevrolet | Malibu | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1970 - 1974 | Chevrolet | Monte Carlo | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1976 | Chevrolet | Monte Carlo | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | Chevrolet | Monte Carlo | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1976 | Chevrolet | Monza | 4.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; 50 State Legal |
| 1969 - 1971 | Chevrolet | Nova | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1974 | Chevrolet | Nova | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | Chevrolet | Nova | 4.3L V8, 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; 50 State Legal; Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1979 | Chevrolet | Nova | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1966 | Chevrolet | Suburban | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1972 | Chevrolet | Townsman | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 | GMC | C15 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 | GMC | C15 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | GMC | C15 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 | GMC | C15 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | C1500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | C1500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1986 | GMC | C1500 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | C15/C1500 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | C15/C1500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1971 | GMC | C15/C1500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1973 - 1974 | GMC | C15/C1500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1967 | GMC | C15/C1500 Suburban | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | C15/C1500 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | C15/C1500 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | GMC | C15 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 | GMC | C25 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1978 | GMC | C25 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 | GMC | C2500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | GMC | C2500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 | GMC | C2500 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 | GMC | C2500 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | C2500 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | C25/C2500 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | C25/C2500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | C25/C2500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1967 | GMC | C25/C2500 Suburban | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | C25/C2500 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1972 | GMC | C25/C2500 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1974 | GMC | C25/C2500 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1977 | GMC | C25 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 | GMC | C25 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 | GMC | C35 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 - 1978 | GMC | C35 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 | GMC | C3500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | GMC | C3500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | C35/C3500 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | C35/C3500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | C35/C3500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1978 - 1979 | GMC | Caballero | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 | GMC | G15 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1976 | GMC | G15 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1978 | GMC | G15 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 | GMC | G1500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | GMC | G1500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | G15/G1500 Van | 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1974 | GMC | G15/G1500 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | GMC | G25 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | G2500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | G2500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | G25/G2500 Van | 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1974 | GMC | G25/G2500 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | GMC | G35 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | G3500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1988 | GMC | G3500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1971 - 1974 | GMC | G35/G3500 Van | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1970 - 1974 | GMC | Jimmy | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1979 | GMC | Jimmy | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1980 - 1986 | GMC | Jimmy | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1978 | GMC | K15 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | K1500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | K1500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | K1500 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | K1500 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | K15/K1500 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | K15/K1500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | K15/K1500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1967 | GMC | K15/K1500 Suburban | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; 50 State Legal |
| 1968 | GMC | K15/K1500 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | K15/K1500 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | GMC | K15 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1975 - 1978 | GMC | K25 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | K2500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | K2500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | K2500 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | K2500 Suburban | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1967 | GMC | K25/K2500 Pickup | 5.3L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | K25/K2500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | K25/K2500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1968 | GMC | K25/K2500 Suburban | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | K25/K2500 Suburban | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1978 | GMC | K25 Suburban | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1978 | GMC | K35 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1979 - 1980 | GMC | K3500 | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1981 - 1986 | GMC | K3500 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1968 | GMC | K35/K3500 Pickup | 5.3L V8, 5.4L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1969 - 1974 | GMC | K35/K3500 Pickup | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1971 | GMC | Sprint | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1974 | GMC | Sprint | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal | |
| 1975 - 1976 | GMC | Sprint | 5.7L V8, 6.6L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | GMC | Sprint | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | Oldsmobile | Custom Cruiser | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 - 1979 | Oldsmobile | Cutlass | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 | Oldsmobile | Cutlass Supreme | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | Oldsmobile | Delta 88 | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1979 | Oldsmobile | Omega | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 - 1979 | Pontiac | Firebird | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 - 1979 | Pontiac | Grand LeMans | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1978 - 1979 | Pontiac | LeMans | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 - 1979 | Pontiac | Phoenix | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |
| 1977 | Pontiac | Ventura | 5.7L V8 | Bare w/Valves; 23 Degree Valve Angle; 64cc Chamber Vol.; 2.10in. Intake/1.60in. Exh. Valve; Single; For Use w/Mechanical Roller Cams; CARB E.O. D-215-49; Must Use Choke Kit PN[1932] If Using Hot Air Choke Carb And Performer Intke; Do Not Use On Eng. w/Less Than 4in. Bore; Exc w/Cam Less Than .450in. Valve; When Using Stock Rockers Must Use .100 in. Longer Than Stock Pushrods; Recommend FelPro Gasket; PN[1014] Head; PN[1205] Intake; PN[1404] Exhaust; 50 State Legal |