Free shipping over C$100
Edelbrock Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8
Part # 5862
Description
The Edelbrock #5862 Sure Seat Valve Spring for Big-Block Chevy 396-402-427-454 V8 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
Specifications
| Camshaft Type | Hydraulic Flat Tappet |
|---|---|
| Coil Bind Height | 1.340 in |
| Damper Spring Included | Yes |
| Inside Diameter | 1.082 in |
| Installed Height | 1.880 in |
| Installed Pressure | 90 |
| Material | Chromium Silicon |
| Open Pressure | 220 lbs/ft |
| Outside Diameter | 1.500 in |
| Quantity | Set of 16 |
| Spring Open Height | 0.420 in |
| Spring Type | Cylindrical |
| Springs Per Valve | Single |
| UPC / GTIN | 00085347058624 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1963 | Chevrolet | Bel Air | 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 | Chevrolet | Bel Air | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Chevrolet | Bel Air | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Bel Air | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | Bel Air | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1975 | Chevrolet | Bel Air | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1963 | Chevrolet | Biscayne | 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 | Chevrolet | Biscayne | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Chevrolet | Biscayne | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Biscayne | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | Biscayne | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | Chevrolet | Blazer | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Brookwood | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1971 | Chevrolet | Brookwood | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1972 | Chevrolet | Brookwood | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1975 - 1980 | Chevrolet | C10 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | C10 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | C10 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | Chevrolet | C10 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | C10 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | C10 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1980 | Chevrolet | C10 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1986 | Chevrolet | C20 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | C20 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | C20 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | Chevrolet | C20 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | C20 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | C20 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1986 | Chevrolet | C20 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1986 | Chevrolet | C30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | C30 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | C30 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | Chevrolet | C30 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1967 - 1968 | Chevrolet | Camaro | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Camaro | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | Camaro | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1966 - 1969 | Chevrolet | Caprice | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Caprice | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | Caprice | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1976 | Chevrolet | Caprice | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 - 1969 | Chevrolet | Chevelle | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Chevelle | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1971 | Chevrolet | Chevelle | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1972 | Chevrolet | Chevelle | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 | Chevrolet | Chevelle | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 | Chevrolet | Chevy II | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 | Chevrolet | Corvette | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Chevrolet | Corvette | 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1974 | Chevrolet | Corvette | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Chevrolet | El Camino | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | El Camino | 6.5L V8, 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | El Camino | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1975 | Chevrolet | El Camino | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Estate | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Estate | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | G10 Van | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 | Chevrolet | G20 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | G20 Van | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1976 | Chevrolet | G30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | G30 Van | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1963 | Chevrolet | Impala | 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 | Chevrolet | Impala | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Chevrolet | Impala | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Impala | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | Impala | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1976 | Chevrolet | Impala | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 | Chevrolet | K10 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1980 | Chevrolet | K10 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | K10 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | K10 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | K10 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | K10 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | K10 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | Chevrolet | K10 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 - 1978 | Chevrolet | K20 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | K20 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | K20 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | K20 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | K20 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | Chevrolet | K20 Suburban | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | K20 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1985 | Chevrolet | K20 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1977 | Chevrolet | K30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1980 - 1986 | Chevrolet | K30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Chevrolet | K30 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1971 | Chevrolet | K30 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1972 | Chevrolet | K30 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | Chevrolet | K30 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 - 1978 | Chevrolet | K5 Blazer | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Kingswood | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Kingswood | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | Chevrolet | Kingswood | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1970 - 1972 | Chevrolet | Monte Carlo | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1975 | Chevrolet | Monte Carlo | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Nova | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Chevrolet | Nova | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1971 | Chevrolet | Nova | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1972 | Chevrolet | Nova | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1988 | Chevrolet | R30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1989 | Chevrolet | R3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1969 | Chevrolet | Townsman | 6.5L V8, 7.0L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1971 | Chevrolet | Townsman | 6.6L V8, 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1972 | Chevrolet | Townsman | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1987 - 1988 | Chevrolet | V30 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1989 | Chevrolet | V3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1978 | GMC | C15 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1980 | GMC | C1500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1980 | GMC | C1500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | C15/C1500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | C15/C1500 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | C15/C1500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | C15/C1500 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | C15/C1500 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | C15/C1500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1978 | GMC | C15 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1978 | GMC | C25 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1986 | GMC | C2500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1986 | GMC | C2500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | C25/C2500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | C25/C2500 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | C25/C2500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | C25/C2500 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | C25/C2500 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | C25/C2500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1978 | GMC | C25 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1978 | GMC | C35 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1986 | GMC | C3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | C35/C3500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | C35/C3500 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | C35/C3500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1975 - 1976 | GMC | G25 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 | GMC | G35 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | G35/G3500 Van | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | Jimmy | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 | GMC | Jimmy | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 | GMC | K15 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1980 | GMC | K1500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | K15/K1500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | K15/K1500 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | K15/K1500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | K15/K1500 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | K15/K1500 Suburban | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 - 1974 | GMC | K15/K1500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 - 1978 | GMC | K25 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | K25/K2500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | K25/K2500 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | K25/K2500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | K25/K2500 Suburban | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1972 | GMC | K25/K2500 Suburban | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | K25/K2500 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1976 - 1977 | GMC | K25 Suburban | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1979 - 1986 | GMC | K3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | GMC | K35/K3500 Pickup | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1971 | GMC | K35/K3500 Pickup | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1972 | GMC | K35/K3500 Pickup | 6.6L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1973 - 1974 | GMC | K35/K3500 Pickup | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1989 | GMC | R3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1971 - 1972 | GMC | Sprint | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1973 | GMC | Sprint | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1974 - 1975 | GMC | Sprint | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1987 - 1989 | GMC | V3500 | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1968 - 1969 | Pontiac | Acadian | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 - 1971 | Pontiac | Acadian | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 - 1969 | Pontiac | Beaumont | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Pontiac | Laurentian | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Pontiac | Laurentian | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1966 - 1969 | Pontiac | Parisienne | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Pontiac | Parisienne | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1965 - 1969 | Pontiac | Strato-Chief | 6.5L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |
| 1970 | Pontiac | Strato-Chief | 7.4L V8 | Street; Non-Rotator; Seat Press. 90 lbs.; Installed H 1.880 in.; Open Press. 220 lbs. at 0.420 in.; OD 1.500 in.; ID 1.082 in.; Coil Bind 1.340 in.; For Use w/Cast Iron OE Cyl. Heads |