Free shipping over C$100
Description
The Edelbrock #5814 Sure Seat Valve Spring for Chevy 4.3L 90 Deg V6 1987-95 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
Specifications
| Camshaft Type | Hydraulic Flat Tappet |
|---|---|
| Coil Bind Height | 1.160 in |
| Damper Spring Included | Yes |
| Inside Diameter | 0.750 in |
| Installed Height | 1.700 in |
| Installed Pressure | 110 |
| Material | Chromium Silicon |
| Open Pressure | 285 lbs/ft |
| Outside Diameter | 1.250 in |
| Quantity | Set of 12 |
| Spring Open Height | 0.490 in |
| Spring Type | Cylindrical |
| Springs Per Valve | Single |
| UPC / GTIN | 00085347058143 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1987 - 1991 | Chevrolet | Astro | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1994 | Chevrolet | Astro | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1988 - 1995 | Chevrolet | C1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | Chevrolet | C2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1990 | Chevrolet | Caprice | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1993 | Chevrolet | Caprice | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 | Chevrolet | Commercial Chassis | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | Chevrolet | El Camino | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | Chevrolet | G10 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | Chevrolet | G20 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | Chevrolet | G30 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | Chevrolet | K1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | Chevrolet | K2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1988 | Chevrolet | Monte Carlo | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1990 - 1995 | Chevrolet | P30 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | Chevrolet | R10 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1988 | Chevrolet | R20 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | Chevrolet | S10 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1991 | Chevrolet | S10 Blazer | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1994 | Chevrolet | S10 Blazer | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1987 | Chevrolet | V10 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | GMC | C1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | GMC | C2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | GMC | Caballero | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | GMC | G1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | GMC | G2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1995 | GMC | G3500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1994 | GMC | Jimmy | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1988 - 1995 | GMC | K1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1995 | GMC | K2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1990 - 1995 | GMC | P3500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | GMC | R1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | GMC | R2500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1990 | GMC | S15 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1988 - 1991 | GMC | S15 Jimmy | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 - 1991 | GMC | Safari | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1994 | GMC | Safari | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1991 - 1995 | GMC | Sonoma | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1991 | GMC | Syclone | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 - 1993 | GMC | Typhoon | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1987 | GMC | V1500 | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1991 | Oldsmobile | Bravada | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |
| 1992 | Oldsmobile | Bravada | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads | |
| 1987 | Pontiac | Grand Prix | 4.3L V6 | Street; Non-Rotator; Seat Press. 110 lbs.; Installed Height 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.8750in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads |