Free shipping over C$100
Description
Edelbrock Rollin' Thunder Camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 300HP and 325 Ft Lbs of Torque when paired with Performer intake manifold #3821 and Performer cylinder heads #60379. May use original hydraulic roller lifters. Our #3722 camshaft is for mass-air engines only. Must us e high stall torque converter. 50-State Legal E.O. #D-215-14. Camshaft specifications: - Intake duration: 220 Degrees - Exhaust duration: 220 Degrees - Intake lift: .498" - Exhaust lift: .498" - Lobe separation: 110 Degree - Intake Center Line: 110 - Vacuum: 13"
Specifications
| Advertised Exhaust Duration | 282 deg |
|---|---|
| Advertised Intake Duration | 282 deg |
| Cam Type | Roller |
| Computer Controlled Compatible | Yes |
| Exhaust Duration at .050 inch Lift | 220 deg |
| Exhaust Valve Lift | 0.311 in |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.498 in |
| Intake Duration at .050 Inch Lift | 220 deg |
| Intake Valve Lift | 0.311 in |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.498 in |
| Lifter Type | Roller |
| Lobe Separation | 110 deg |
| UPC / GTIN | 00085347037223 |
| Year | Make | Model | Submodel | Engine | Note |
|---|---|---|---|---|---|
| 1970 - 1971 | DeTomaso | Mangusta | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1972 | Ford | Bronco | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1973 | Ford | Bronco | Wagon | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1974 - 1977 | Ford | Bronco | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1980 - 1996 | Ford | Bronco | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Country Sedan | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Country Squire | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1991 | Ford | Country Squire | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1972 | Ford | Custom | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Custom 500 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 - 1975 | Ford | E-100 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1983 | Ford | E-100 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1983 | Ford | E-100 Econoline Club Wagon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 | Ford | E-150 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1996 | Ford | E-150 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1996 | Ford | E-150 Econoline Club Wagon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 - 1974 | Ford | E-200 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 | Ford | E-250 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1991 | Ford | E-250 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1980 | Ford | E-250 Econoline Club Wagon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 - 1974 | Ford | E-300 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 | Ford | E-350 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1982 | Ford | E-350 Econoline | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1980 | Ford | E-350 Econoline Club Wagon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1996 - 1998 | Ford | Explorer | Eddie Bauer, Limited, XLT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1999 - 2000 | Ford | Explorer | Eddie Bauer, Limited, XLS, XLT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 2001 | Ford | Explorer | Eddie Bauer, Limited, XLT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 - 1983 | Ford | F-100 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 - 1992 | Ford | F-150 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1993 - 1994 | Ford | F-150 | XL, XLT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1995 | Ford | F-150 | Eddie Bauer, Special, XL, XLT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1996 | Ford | F-150 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 2013 - 2014 | Ford | F-150 | FX4 | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1972 - 1974 | Ford | F-250 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 - 1978 | Ford | F-250 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1980 - 1996 | Ford | F-250 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1972 - 1978 | Ford | F-350 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1980 | Ford | F-350 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1970 | Ford | Fairlane | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1978 - 1979 | Ford | Fairmont | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1970 | Ford | Falcon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Galaxie 500 | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 - 1980 | Ford | Granada | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1972 - 1974 | Ford | Gran Torino | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | LTD | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 - 1978 | Ford | LTD | Base, Landau | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1981 | Ford | LTD | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1982 | Ford | LTD | Base, Country Squire, Crown Victoria, S | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1983 - 1985 | Ford | LTD | Country Squire, Crown Victoria | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1986 | Ford | LTD | Country Squire, Country Squire LX, Crown Victoria, Crown Victoria LX | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1991 | Ford | LTD Crown Victoria | Base, LX, S | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 | Ford | LTD II | Base, Brougham, S | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1978 - 1979 | Ford | LTD II | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1971 - 1977 | Ford | Maverick | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 | Ford | Mustang | Base, Shelby GT-350 | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 | Ford | Mustang | Base | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1970 - 1972 | Ford | Mustang | Base, Grande | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1973 | Ford | Mustang | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 | Ford | Mustang | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1983 | Ford | Mustang | GT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1984 | Ford | Mustang | GT, GT-350 20th Anniversary, L, LX | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1985 | Ford | Mustang | GT | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 - 1978 | Ford | Mustang II | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Ranchero | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 - 1979 | Ford | Ranchero | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Ford | Ranch Wagon | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 - 1981 | Ford | Thunderbird | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1983 | Ford | Thunderbird | Base, Heritage, LX, Sport | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1984 - 1985 | Ford | Thunderbird | Base, Elan, Fila, LX, Sport | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1986 | Ford | Thunderbird | Base, Elan, LX, Sport | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1988 | Ford | Thunderbird | Base, LX, Sport | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 | Ford | Torino | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 | Ford | Torino | Base, GT, Squire | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1970 | Ford | Torino | Base, Brougham, GT, Squire | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1971 | Ford | Torino | 500, Base, Brougham, GT, Squire | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1972 - 1974 | Ford | Torino | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1980 | Lincoln | Continental | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1982 - 1987 | Lincoln | Continental | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1980 - 1983 | Lincoln | Mark VI | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1984 | Lincoln | Mark VII | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1985 | Lincoln | Mark VII | Base, Bill Blass, Versace | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1986 - 1987 | Lincoln | Mark VII | Base, Bill Blass | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque | |
| 1981 - 1990 | Lincoln | Town Car | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 - 1980 | Lincoln | Versailles | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 | Mercury | Capri | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1982 - 1985 | Mercury | Capri | RS | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1991 | Mercury | Colony Park | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1969 | Mercury | Comet | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1971 - 1977 | Mercury | Comet | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 | Mercury | Cougar | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1969 | Mercury | Cougar | Base, XR-7 | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1977 | Mercury | Cougar | Base, Brougham, XR-7 | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1978 - 1980 | Mercury | Cougar | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1981 | Mercury | Cougar | XR-7 | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1983 | Mercury | Cougar | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1984 - 1986 | Mercury | Cougar | Base, LS | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1988 | Mercury | Cougar | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1971 | Mercury | Cyclone | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1982 | Mercury | Grand Marquis | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1983 - 1986 | Mercury | Grand Marquis | Base, Colony Park, LS | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1987 - 1989 | Mercury | Grand Marquis | GS, LS | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1990 - 1991 | Mercury | Grand Marquis | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1979 - 1982 | Mercury | Marquis | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1975 - 1980 | Mercury | Monarch | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1974 | Mercury | Montego | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1997 - 2001 | Mercury | Mountaineer | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1978 - 1979 | Mercury | Zephyr | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 | Omega | Omega | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1972 - 1974 | TVR | 3000M | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |
| 1968 - 1971 | TVR | Tuscan | - | 5.0L V8 | Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int/Exh 220 Deg.; Lift at Valve Int/Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.; CARB E.O. D-215-14; May Use Original Hydraulic Roller Lifters; Idle Vacuum - 13 inch; 50 State Legal; Match w/Performer Intake 3821 and Performer Heads 60379; This Combo Produces 300hp and 325 ft.-lbs. of Torque |