Free shipping over C$100
Edelbrock Performer-RPM Camshaft for 1987-Later S/B Chevy 283-400 V8 Non LT1 / NON Gen III
Part # 2204
Description
Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 435HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813 and Performer RPM E-Tec cylinder heads #60795. Use with high stall torque converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"
Specifications
| Advertised Exhaust Duration | 300 deg |
|---|---|
| Advertised Intake Duration | 296 deg |
| Cam Type | Roller |
| Computer Controlled Compatible | No |
| Exhaust Duration at .050 inch Lift | 238 deg |
| Exhaust Valve Lift | 0.365 in |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.548 in |
| Intake Duration at .050 Inch Lift | 234 deg |
| Intake Valve Lift | 0.539 in |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.539 in |
| Lifter Type | Roller |
| Lobe Separation | 112 deg |
| UPC / GTIN | 00085347022045 |
| Year | Make | Model | Submodel | Engine | Note |
|---|---|---|---|---|---|
| 1991 | Buick | Commercial Chassis | - | 5.0L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1993 | Buick | Commercial Chassis | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1991 | Buick | Roadmaster | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg. |
| 1992 - 1993 | Buick | Roadmaster | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1990 | Cadillac | Brougham | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1991 - 1992 | Cadillac | Brougham | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1993 | Cadillac | Commercial Chassis | Brougham | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1993 | Cadillac | Fleetwood | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Chevrolet | Blazer | - | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1994 | Chevrolet | Blazer | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1989 | Chevrolet | C1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1990 - 1992 | Chevrolet | C1500 | Cheyenne, Scottsdale, Silverado, WT | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1993 | Chevrolet | C1500 | Cheyenne, Silverado, WT | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1994 - 1995 | Chevrolet | C1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 - 1995 | Chevrolet | C1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | Chevrolet | C2500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1995 | Chevrolet | C2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1995 | Chevrolet | C3500 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1992 | Chevrolet | Camaro | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | Caprice | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1989 - 1990 | Chevrolet | Caprice | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1991 | Chevrolet | Caprice | Classic, Classic LTZ | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller | |
| 1992 | Chevrolet | Caprice | Classic, Classic LTZ | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1993 | Chevrolet | Caprice | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 - 1989 | Chevrolet | Corvette | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1990 - 1991 | Chevrolet | Corvette | Base | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1993 | Chevrolet | G10 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1994 - 1995 | Chevrolet | G10 | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1995 | Chevrolet | G20 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1996 | Chevrolet | G30 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1995 | Chevrolet | K1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1995 | Chevrolet | K1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | Chevrolet | K2500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 - 1995 | Chevrolet | K2500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | Chevrolet | K3500 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | Monte Carlo | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Chevrolet | R10 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Chevrolet | R10 Suburban | - | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 | Chevrolet | R10 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1989 - 1991 | Chevrolet | R1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 - 1988 | Chevrolet | R20 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | R20 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1989 - 1991 | Chevrolet | R2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | R30 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg. |
| 1989 - 1991 | Chevrolet | R3500 | - | 5.7L V8 | Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1995 | Chevrolet | Tahoe | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Chevrolet | V10 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in. |
| 1987 - 1988 | Chevrolet | V10 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1989 - 1991 | Chevrolet | V1500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Chevrolet | V20 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | V20 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1989 - 1991 | Chevrolet | V2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Chevrolet | V30 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1989 - 1991 | Chevrolet | V3500 | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | GMC | C1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1994 | GMC | C1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1995 | GMC | C1500 Suburban | Base | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1995 | GMC | C2500 | - | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 - 1995 | GMC | C2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1995 | GMC | C3500 | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 - 1993 | GMC | G1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1994 - 1995 | GMC | G1500 | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1995 | GMC | G2500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 - 1988 | GMC | G3500 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1989 - 1995 | GMC | G3500 | - | 5.7L V8 | Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; 1500-6500 rpm; Hyd Roller |
| 1996 | GMC | G3500 | Magnavan, Rally, Rally STX, Vandura | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 | GMC | Jimmy | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1991 | GMC | Jimmy | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | GMC | K1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 - 1995 | GMC | K1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1995 | GMC | K2500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 - 1995 | GMC | K2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1995 | GMC | K3500 | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 | GMC | R1500 | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | GMC | R1500 Suburban | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1988 - 1991 | GMC | R1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 | GMC | R2500 | - | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1988 - 1989 | GMC | R2500 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1991 | GMC | R2500 Suburban | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1991 | GMC | R3500 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | GMC | V1500 | - | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1991 | GMC | V1500 Suburban | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1987 | GMC | V2500 | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1991 | GMC | V2500 Suburban | - | 5.7L V8 | Hyd Roller; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm |
| 1987 - 1991 | GMC | V3500 | - | 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller |
| 1992 - 1995 | GMC | Yukon | - | 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1991 | Oldsmobile | Custom Cruiser | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1992 | Oldsmobile | Custom Cruiser | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 - 1988 | Pontiac | Firebird | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1989 | Pontiac | Firebird | Base, Formula, Trans Am, Trans Am GTA | 5.0L V8, 5.7L V8 | Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque; Intake Center Line 107 Deg.; Lobe Seps 112 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Adv Dur. 0.050 Int/Exh 234/238 Deg.; 1500-6500 rpm; Hyd Roller; Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1990 - 1992 | Pontiac | Firebird | - | 5.0L V8, 5.7L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |
| 1987 | Pontiac | Grand Prix | - | 5.0L V8 | Hyd Roller; 1500-6500 rpm; Adv Dur. 0.050 Int/Exh 234/238 Deg.; Lift at Valve Int/Exh 0.539/0.548 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Idle Vacuum at 1000 RPM - 12 inch; Designed For The Engine Swap Market; Not Legal For Use On Pollution Controlled Vehicles; Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813; And Performer RPM E-Tech Heads 60975; This Combo Produces 435hp and 435 ft.-lbs. Of Torque |