Free shipping over C$100
Edelbrock Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95, 80 lbs Installed Pressure
Part # 5894
Description
Edelbrock part #5894 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are supplied with retainers and lock kit. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 80 lbs. Installed Height: 1.700" Open Pressure: 200 lbs. @ 0.475" Outside Diameter: 1.222" Inside Diameter: 0.875" Coil Bind: 1.150"
Specifications
| Camshaft Type | Hydraulic Flat Tappet |
|---|---|
| Coil Bind Height | 1.150 in |
| Damper Spring Included | Yes |
| Inside Diameter | 0.880 in |
| Installed Height | 1.700 in |
| Installed Pressure | 80 |
| Locks Included | Yes |
| Material | Chromium Silicon |
| Open Pressure | 200 lbs/ft |
| Outside Diameter | 1.265 in |
| Quantity | Kit |
| Retainers Included | Yes |
| Spring Open Height | 0.475 in |
| Spring Type | Cylindrical |
| Springs Per Valve | Single |
| UPC / GTIN | 00085347058945 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1965 - 1967 | Avanti | II | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1971 | Avanti | II | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1973 - 1974 | Avanti | II | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1976 | Avanti | II | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1980 | Avanti | II | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Buick | Century | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Buick | Century | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Buick | Century | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1991 | Buick | Commercial Chassis | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1993 | Buick | Commercial Chassis | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Buick | LeSabre | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Buick | LeSabre | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Buick | Regal | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1980 | Buick | Regal | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Buick | Regal | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Buick | Regal | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1987 | Buick | Regal | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1991 | Buick | Roadmaster | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1993 | Buick | Roadmaster | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Buick | Skylark | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1990 | Cadillac | Brougham | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1991 - 1992 | Cadillac | Brougham | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | Cadillac | Commercial Chassis | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1993 - 1995 | Cadillac | Fleetwood | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1968 | Checker | Aerobus | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Checker | Aerobus | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1969 - 1970 | Checker | Deluxe | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1965 - 1967 | Checker | Marathon | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Checker | Marathon | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Checker | Marathon | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Checker | Marathon | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Checker | Marathon | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1981 | Checker | Marathon | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Checker | Marathon | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Checker | Taxicab | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1959 | Chevrolet | 3B | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | 3C | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | 3D | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | 3E | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | 3F | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | 3G | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Chevrolet | Bel Air | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | Chevrolet | Bel Air | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1961 | Chevrolet | Bel Air | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Chevrolet | Bel Air | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Bel Air | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | Bel Air | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | Bel Air | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Chevrolet | Bel Air | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1961 | Chevrolet | Biscayne | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Chevrolet | Biscayne | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Biscayne | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1972 | Chevrolet | Biscayne | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1969 - 1974 | Chevrolet | Blazer | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1987 | Chevrolet | Blazer | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1994 | Chevrolet | Blazer | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1961 | Chevrolet | Brookwood | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1972 | Chevrolet | Brookwood | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | C10 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | C10 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1980 | Chevrolet | C10 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Chevrolet | C10 | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 - 1986 | Chevrolet | C10 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | C10 Pickup | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | C10 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | C10 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | C10 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | Chevrolet | C10 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | C10 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | C10 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Chevrolet | C10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | C10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | C10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | Chevrolet | C10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | Chevrolet | C1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | Chevrolet | C1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Chevrolet | C20 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | C20 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | Chevrolet | C20 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | Chevrolet | C20 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | Chevrolet | C20 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | C20 Pickup | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | C20 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | C20 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | C20 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | Chevrolet | C20 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | C20 Suburban | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | C20 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | C20 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | C20 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | C20 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | C20 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | Chevrolet | C20 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | Chevrolet | C2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | Chevrolet | C2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Chevrolet | C30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 - 1977 | Chevrolet | C30 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Chevrolet | C30 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1986 | Chevrolet | C30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | C30 Pickup | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | C30 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | C30 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | C30 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1988 - 1995 | Chevrolet | C3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1962 | Chevrolet | C40 | 4.6L V8 | For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit; Coil Bind 1.150in.; ID 0.875in.; OD 1.222in.; Open Press. 200 lbs. at 0.475in.; Installed H 1.70in.; Seat Press. 80lbs.; Non-Rotator; Street |
| 1967 - 1974 | Chevrolet | Camaro | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | Camaro | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 - 1979 | Chevrolet | Camaro | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1981 | Chevrolet | Camaro | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 - 1986 | Chevrolet | Camaro | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1992 | Chevrolet | Camaro | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | Caprice | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Caprice | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | Caprice | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Chevrolet | Caprice | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | Caprice | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | Caprice | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1982 | Chevrolet | Caprice | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1984 | Chevrolet | Caprice | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1985 - 1993 | Chevrolet | Caprice | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Chevrolet | Chevelle | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1973 | Chevrolet | Chevelle | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1963 - 1964 | Chevrolet | Chevy II | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1965 - 1966 | Chevrolet | Chevy II | 4.6L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | Chevrolet | Chevy II | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Chevy II | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1991 - 1992 | Chevrolet | Commercial Chassis | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1993 | Chevrolet | Commercial Chassis | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 - 1961 | Chevrolet | Corvette | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Chevrolet | Corvette | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Corvette | 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | Corvette | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1978 | Chevrolet | Corvette | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | Chevrolet | Corvette | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1980 | Chevrolet | Corvette | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1982 | Chevrolet | Corvette | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1984 - 1995 | Chevrolet | Corvette | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Chevrolet | Del Ray | 4.3L V8, 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Chevrolet | Del Ray | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 - 1960 | Chevrolet | El Camino | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Chevrolet | El Camino | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1974 | Chevrolet | El Camino | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | El Camino | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | El Camino | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | Chevrolet | El Camino | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | Chevrolet | El Camino | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1982 | Chevrolet | El Camino | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1987 | Chevrolet | El Camino | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1970 | Chevrolet | Estate | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | G10 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | G10 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1993 | Chevrolet | G10 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1994 - 1995 | Chevrolet | G10 | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1973 | Chevrolet | G10 Van | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1974 | Chevrolet | G10 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1979 | Chevrolet | G20 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | G20 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1995 | Chevrolet | G20 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | Chevrolet | G20 Van | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1969 | Chevrolet | G20 Van | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 - 1974 | Chevrolet | G20 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1977 | Chevrolet | G30 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1979 | Chevrolet | G30 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | G30 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Chevrolet | G30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Chevrolet | G30 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1984 | Chevrolet | G30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1985 | Chevrolet | G30 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1986 - 1995 | Chevrolet | G30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1974 | Chevrolet | G30 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1958 - 1961 | Chevrolet | Impala | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1963 | Chevrolet | Impala | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Chevrolet | Impala | 4.6L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | Impala | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | Impala | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Chevrolet | Impala | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | Impala | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1982 | Chevrolet | Impala | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1985 | Chevrolet | Impala | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | Chevrolet | K10 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | Chevrolet | K10 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | Chevrolet | K10 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | Chevrolet | K10 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | K10 Pickup | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | K10 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | K10 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | K10 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | Chevrolet | K10 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | K10 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | K10 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Chevrolet | K10 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | K10 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Chevrolet | K10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Chevrolet | K10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Chevrolet | K10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 | Chevrolet | K10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1984 - 1985 | Chevrolet | K10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1986 | Chevrolet | K10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | Chevrolet | K1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | Chevrolet | K1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | Chevrolet | K20 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | Chevrolet | K20 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | Chevrolet | K20 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1984 | Chevrolet | K20 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1985 | Chevrolet | K20 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1986 | Chevrolet | K20 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | Chevrolet | K20 Panel | 4.6L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | K20 Pickup | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 - 1967 | Chevrolet | K20 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | K20 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | K20 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | Chevrolet | K20 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | K20 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | K20 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | Chevrolet | K20 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | Chevrolet | K20 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | Chevrolet | K20 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1984 | Chevrolet | K20 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1985 - 1986 | Chevrolet | K20 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | Chevrolet | K2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | Chevrolet | K2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1980 | Chevrolet | K30 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | Chevrolet | K30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Chevrolet | K30 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | K30 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1988 - 1995 | Chevrolet | K3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | Chevrolet | K5 Blazer | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | K5 Blazer | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1986 | Chevrolet | K5 Blazer | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 - 1961 | Chevrolet | Kingswood | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1972 | Chevrolet | Kingswood | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | Malibu | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Chevrolet | Malibu | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1981 | Chevrolet | Malibu | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Chevrolet | Malibu | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 | Chevrolet | Malibu | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 - 1974 | Chevrolet | Monte Carlo | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | Monte Carlo | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | Monte Carlo | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Chevrolet | Monte Carlo | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Chevrolet | Monte Carlo | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1982 | Chevrolet | Monte Carlo | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1988 | Chevrolet | Monte Carlo | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Chevrolet | Monza | 4.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | Chevrolet | Monza | 4.3L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Chevrolet | Monza | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1961 | Chevrolet | Nomad | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | Chevrolet | Nova | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | Chevrolet | Nova | 4.3L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 - 1979 | Chevrolet | Nova | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Chevrolet | One-Fifty Series | 4.3L V8, 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 - 1961 | Chevrolet | Parkwood | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | Chevrolet | R10 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | Chevrolet | R10 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 | Chevrolet | R10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | R1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | R20 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | R20 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | R2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | R30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | R3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Chevrolet | Sedan Delivery | 4.3L V8, 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Chevrolet | Sedan Delivery | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | Chevrolet | Suburban | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1966 | Chevrolet | Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1995 | Chevrolet | Tahoe | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1972 | Chevrolet | Townsman | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1957 | Chevrolet | Truck | 4.3L V8, 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Chevrolet | Truck | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 | Chevrolet | Truck | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Chevrolet | Two-Ten Series | 4.3L V8, 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | Chevrolet | V10 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | V10 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | V1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | Chevrolet | V20 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | V20 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | V2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1988 | Chevrolet | V30 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1989 - 1991 | Chevrolet | V3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Chevrolet | Yeoman | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1993 | Excalibur | Limited | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1986 - 1989 | Excalibur | Phaeton | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 100 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 100 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1963 | GMC | 1000 Series | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 150 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 150 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1963 | GMC | 1500 Series | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 250 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 250 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1963 | GMC | 2500 Series | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 300 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 300 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1966 | GMC | 3000 | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1966 | GMC | 3500 | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 350-8 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 350-8 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | 370 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | 370 | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | GMC | C15 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | GMC | C15 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | GMC | C15 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | GMC | C15 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | C1500 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | C1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | C1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | C1500 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | GMC | C1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | C1500 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | GMC | C1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | C15/C1500 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | C15/C1500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | C15/C1500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | GMC | C15/C1500 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | C15/C1500 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | C15/C1500 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | GMC | C15 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | C15 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | GMC | C25 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | GMC | C25 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | C25 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | C2500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1986 | GMC | C2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | C2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | C2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | GMC | C2500 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | GMC | C2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 - 1986 | GMC | C2500 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | GMC | C2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | C25/C2500 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | C25/C2500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | C25/C2500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | GMC | C25/C2500 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | C25/C2500 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | C25/C2500 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | GMC | C25 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | GMC | C25 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | GMC | C25 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | GMC | C35 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 - 1977 | GMC | C35 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | GMC | C35 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | C3500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1985 | GMC | C3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1986 | GMC | C3500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | C3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | C35/C3500 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | C35/C3500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | C35/C3500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1978 | GMC | Caballero | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | Caballero | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1982 | GMC | Caballero | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1987 | GMC | Caballero | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | F350 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | F370 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | FM340 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | FM350 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | GMC | G15 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | GMC | G15 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | G15 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | G1500 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1993 | GMC | G1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1994 - 1995 | GMC | G1500 | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | G15/G1500 Van | 4.6L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1973 | GMC | G15/G1500 Van | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1974 | GMC | G15/G1500 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1978 | GMC | G25 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | G2500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1995 | GMC | G2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | G25/G2500 Van | 4.6L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1973 | GMC | G25/G2500 Van | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1974 | GMC | G25/G2500 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1978 | GMC | G35 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | G3500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1995 | GMC | G3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 - 1974 | GMC | G35/G3500 Van | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1970 - 1974 | GMC | Jimmy | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | GMC | Jimmy | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | GMC | Jimmy | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1987 | GMC | Jimmy | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1991 | GMC | Jimmy | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | GMC | K15 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | K15 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | K1500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | K1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | K1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | GMC | K1500 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | GMC | K1500 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | GMC | K1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | GMC | K1500 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1986 | GMC | K1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | GMC | K1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | K15/K1500 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | K15/K1500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | K15/K1500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | GMC | K15/K1500 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | K15/K1500 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | K15/K1500 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | GMC | K15 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | K15 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | GMC | K25 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | K25 | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | K2500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | K2500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | K2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | K2500 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | K2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | GMC | K2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1967 | GMC | K25/K2500 Pickup | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | K25/K2500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | K25/K2500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1967 | GMC | K25/K2500 Suburban | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | K25/K2500 Suburban | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | K25/K2500 Suburban | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 - 1976 | GMC | K25 Suburban | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | K25 Suburban | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1978 | GMC | K35 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | GMC | K3500 | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1986 | GMC | K3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1995 | GMC | K3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | GMC | K35/K3500 Pickup | 5.0L V8, 5.3L V8, 5.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1974 | GMC | K35/K3500 Pickup | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1958 - 1959 | GMC | M300 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | PM150 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | PM151 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | PM151 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | PM152 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | PM152 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | PM153 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 | GMC | PM153 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | PM250 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | PM251 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | GMC | PM252 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | GMC | PM253 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | GMC | R1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | GMC | R1500 Suburban | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1991 | GMC | R1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | GMC | R2500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1988 - 1989 | GMC | R2500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1991 | GMC | R2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1991 | GMC | R3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | S300 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | S370 | 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1971 - 1974 | GMC | Sprint | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1975 | GMC | Sprint | 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1976 | GMC | Sprint | 5.0L V8, 5.7L V8, 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | GMC | Sprint | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 - 1965 | GMC | Suburban | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | GMC | Truck | 5.3L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1959 | GMC | Truck | 5.3L V8, 5.5L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1960 | GMC | Truck | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | GMC | V1500 | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1991 | GMC | V1500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 | GMC | V2500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1991 | GMC | V2500 Suburban | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1991 | GMC | V3500 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 - 1995 | GMC | Yukon | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Gordon-Keeble | GK1 | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Gordon-Keeble | IT | 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Oldsmobile | Custom Cruiser | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Oldsmobile | Custom Cruiser | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1991 | Oldsmobile | Custom Cruiser | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1992 | Oldsmobile | Custom Cruiser | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1979 | Oldsmobile | Cutlass | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Oldsmobile | Cutlass | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Oldsmobile | Cutlass | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1980 | Oldsmobile | Cutlass Calais | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Oldsmobile | Cutlass Calais | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Oldsmobile | Cutlass Cruiser | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Oldsmobile | Cutlass Cruiser | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1980 | Oldsmobile | Cutlass Salon | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Oldsmobile | Cutlass Supreme | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 - 1980 | Oldsmobile | Cutlass Supreme | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 | Oldsmobile | Cutlass Supreme | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Oldsmobile | Delta 88 | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Oldsmobile | Delta 88 | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1982 | Oldsmobile | Delta 88 | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Oldsmobile | Omega | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Oldsmobile | Starfire | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 | Pontiac | Acadian | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1965 - 1967 | Pontiac | Acadian | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Pontiac | Acadian | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 - 1971 | Pontiac | Acadian | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1964 - 1967 | Pontiac | Beaumont | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 | Pontiac | Beaumont | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1969 | Pontiac | Beaumont | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 | Pontiac | Bonneville | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | Bonneville | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1986 | Pontiac | Bonneville | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | Catalina | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1981 | Pontiac | Catalina | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 | Pontiac | Firebird | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Pontiac | Firebird | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1979 | Pontiac | Firebird | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 | Pontiac | Firebird | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 | Pontiac | Firebird | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1982 - 1986 | Pontiac | Firebird | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1987 - 1992 | Pontiac | Firebird | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | Grand Am | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1980 | Pontiac | Grand Am | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | Grand LeMans | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Pontiac | Grand LeMans | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Pontiac | Grand LeMans | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | Pontiac | Grand LeMans | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1982 | Pontiac | Grand LeMans | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 | Pontiac | Grand LeMans | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 - 1976 | Pontiac | Grand Prix | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1980 | Pontiac | Grand Prix | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1981 - 1982 | Pontiac | Grand Prix | 4.4L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1987 | Pontiac | Grand Prix | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 | Pontiac | Grand Safari | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 | Pontiac | Grandville | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | Grandville | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Pontiac | Laurentian | 4.3L V8, 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1961 | Pontiac | Laurentian | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Pontiac | Laurentian | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1969 | Pontiac | Laurentian | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 - 1974 | Pontiac | Laurentian | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1976 | Pontiac | Laurentian | 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Pontiac | Laurentian | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1979 | Pontiac | Laurentian | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1981 | Pontiac | Laurentian | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1975 | Pontiac | LeMans | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Pontiac | LeMans | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 | Pontiac | LeMans | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1979 | Pontiac | LeMans | 4.4L V8, 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1981 | Pontiac | LeMans | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1959 - 1961 | Pontiac | Parisienne | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Pontiac | Parisienne | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1969 | Pontiac | Parisienne | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 | Pontiac | Parisienne | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1972 - 1974 | Pontiac | Parisienne | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit | |
| 1977 - 1979 | Pontiac | Parisienne | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1980 - 1982 | Pontiac | Parisienne | 4.4L V8, 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1983 - 1986 | Pontiac | Parisienne | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1957 | Pontiac | Pathfinder | 4.3L V8, 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 | Pontiac | Pathfinder | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 - 1979 | Pontiac | Phoenix | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1958 - 1961 | Pontiac | Strato-Chief | 4.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1962 - 1967 | Pontiac | Strato-Chief | 4.6L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1968 - 1969 | Pontiac | Strato-Chief | 5.0L V8, 5.3L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 | Pontiac | Strato-Chief | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1978 - 1979 | Pontiac | Sunbird | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1971 - 1973 | Pontiac | Ventura | 5.0L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1977 | Pontiac | Ventura | 5.0L V8, 5.7L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |
| 1970 - 1971 | Stutz | Blackhawk | 6.6L V8 | Street; Non-Rotator; Seat Press. 80lbs.; Installed H 1.70in.; Open Press. 200 lbs. at 0.475in.; OD 1.222in.; ID 0.875in.; Coil Bind 1.150in.; For Use w/Cast Iron OE Cyl. Heads; Complete Spring/Retainer/Lock Kit |